TTR 5200 Desiccant Dehumidifier
Send us an email
We will get back to you within 24 business hours
Equipment
Savings Packages
Product Description for TTR 5200 Desiccant Dehumidifier
Due to inegrated heat recovery, and the electric energy management rank the TTR 5200 and the rest of the TTR-adsorption dehumidifiers among the most efficient of their kind!
Because of the robust housing and the technology, following highest industrial standards even under rough conditions the TTR 5200 is a reliable dehumidifier.
Benefits in practice:
- Professional quality „made in Germany"
- High dehumidification performance even at low temperatures
- Reliable silicagel sorption rotors in a washable and mechanically high-tensile design
- Integrated heat recycling process
- Electrical regeneration heaters
Standard equipment characteristics of TTR 5200 at a glance:
- Steel housing, galvanized and painted
- Produced with condiseration of weather protection
- Wide range power supply
- Contol of rotor turning (rotor and motor)
- Overheat safety system with restart lock-out (regenaration air)
- Management of operating temperature
- Filter control (air flow and collect warning lights )
- Duoventic-control*
- Configurable change of direction of the air stream (conversion with little effort)
- Connecting terminals external on/off
- Hygrostat with connecting terminals
- Floating contacts (operation, disruption, filter)
Technical data of theTTR 5200:
- Dehumidification performance: 29,1 kg/h
- Dry air flow rate: 5.800 m³/h bei 400 Pa
- Electrical connection: 3x 400 V / 50 Hz
- Heater of regenerated air: 36 kW
- Power consumption max..: 40 kW
- Dimensions LxWxH: 1.750 x 1.100 x 1.700 mm
- Weight: 680 kg
- Connections dry air inlet/outlet Ø: 500 / 500 mm
- Connections regenerated air inlet/outlet Ø: 300 / 300 mm
Possible additional options:
- Control module Millenium
- Flowmatic S
- Flowmatic M
- Humidity and temperature control
- Dew point sensor -80 °C ... +20 °C
- Touchscreen for control of the device
- Remote connection GSM
- Remote connection WLAN
- Heat exchanger module
- Electric reheater for dry air
- External Hygrostat HG 120
- External Hygrostat HG 125
- Transportframe (stackable), with wheels
*Per Duoventic is the performance of each fan independently adjustable by means of potentiometer, also the dampers are not needed
Product Description for TTR 5200 Desiccant Dehumidifier
Due to inegrated heat recovery, and the electric energy management rank the TTR 5200 and the rest of the TTR-adsorption dehumidifiers among the most efficient of their kind!
Because of the robust housing and the technology, following highest industrial standards even under rough conditions the TTR 5200 is a reliable dehumidifier.
Benefits in practice:
- Professional quality „made in Germany"
- High dehumidification performance even at low temperatures
- Reliable silicagel sorption rotors in a washable and mechanically high-tensile design
- Integrated heat recycling process
- Electrical regeneration heaters
Standard equipment characteristics of TTR 5200 at a glance:
- Steel housing, galvanized and painted
- Produced with condiseration of weather protection
- Wide range power supply
- Contol of rotor turning (rotor and motor)
- Overheat safety system with restart lock-out (regenaration air)
- Management of operating temperature
- Filter control (air flow and collect warning lights )
- Duoventic-control*
- Configurable change of direction of the air stream (conversion with little effort)
- Connecting terminals external on/off
- Hygrostat with connecting terminals
- Floating contacts (operation, disruption, filter)
Technical data of theTTR 5200:
- Dehumidification performance: 29,1 kg/h
- Dry air flow rate: 5.800 m³/h bei 400 Pa
- Electrical connection: 3x 400 V / 50 Hz
- Heater of regenerated air: 36 kW
- Power consumption max..: 40 kW
- Dimensions LxWxH: 1.750 x 1.100 x 1.700 mm
- Weight: 680 kg
- Connections dry air inlet/outlet Ø: 500 / 500 mm
- Connections regenerated air inlet/outlet Ø: 300 / 300 mm
Possible additional options:
- Control module Millenium
- Flowmatic S
- Flowmatic M
- Humidity and temperature control
- Dew point sensor -80 °C ... +20 °C
- Touchscreen for control of the device
- Remote connection GSM
- Remote connection WLAN
- Heat exchanger module
- Electric reheater for dry air
- External Hygrostat HG 120
- External Hygrostat HG 125
- Transportframe (stackable), with wheels
*Per Duoventic is the performance of each fan independently adjustable by means of potentiometer, also the dampers are not needed
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.110.000.182 | |
| Dry air (in case of intake air 20°C / 60 % RH) | ||
| Dehumidification [kg/24h] | 698.4 | |
| Dehumidification [kg/h] | 29.1 | |
| Air volume free-blowing [m³/h] | 5,800 | |
| Nominal air volume | Dry air (in case of intake air 20 °C / 60 % RH) [m³/h] | 5,200 | |
| External compression | Dry air (in case of intake air 20 °C / 60 % RH) [Pa] | 400 | |
| Connection inlet Ø [mm] | Dry air (in case of intake air 20 °C / 60 % RH) | 500 | |
| Connection outlet Ø | Dry air (in case of intake air 20 °C / 60 % RH) [mm] | 500 | |
| Regeneration air | ||
| Nominal air volume | Regeneration air [m³/h] | 1,050 | |
| External compression | Regeneration air [Pa] | 300 | |
| Connection inlet Ø | Regeneration air [mm] | 300 | |
| Connection outlet Ø | Regeneration air [mm] | 300 | |
| Operating principle | ||
| Operating principle | TTR Trisorp Dual | |
| Operating range | ||
| Min. temperature [°C] | -20 | |
| Max. temperature [°C] | 40 | |
| Min. humidity [% RH] | 0 | |
| Max. humidity [% RH (non-condensing)] | 100 | |
| Electrical values | ||
| Mains connection | 380 - 480 V, 50/60 Hz | |
| Nominal current consumption [A] | 60 | |
| Installed capacity [kW] | 40 | |
| Heating capacity [kW] | 36 | |
| Recommended fusing [A] | 63 | |
| Electric connection | ||
| Terminal connection | ||
| Automatic dehumidification | ||
| Non-stop dehumidification | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 1,919 | |
| Width (packaging excluded) [mm] | 1,110 | |
| Height (packaging excluded) [mm] | 1,680 | |
| Weight | ||
| (packaging excluded) [kg] | 680 | |
| Equipment, features and functions | ||
|---|---|---|
| Housing type | ||
| Steel housing, galvanized and painted | ||
| Stainless steel | ||
| Device version | ||
| Indoor installation (standard) | ||
| Shelter against the weather | ||
| Hiring model | ||
| stackable | ||
| Equipment | ||
| Wide-range voltage | ||
| Rotor rotation control (rotor and drive) | ||
| Overtemperature protection system with restart lock (regeneration air) | ||
| Operating temperature management (regeneration air) | ||
| Filter monitoring (per air current and collective warning light) | ||
| Duoventic control | ||
| Configurable air direction reversal (conversion requires minimal effort) | ||
| Terminals for external ON/OFF | ||
| Terminals hygrostat | ||
| Potential-free contacts (operation, fault, filter) | ||
| Operating hours counter | ||
| Air volume regulation | ||
| Integrated heat recovery | ||
| Sensor-supported Flowmatic control | ||
| Hygrostat (electronic) | ||
| Hygrostat (mechanical) | ||
| Moisture control | ||
| Moisture and temperature registration | ||
| Power meter | ||
| Ammeter | ||
| DIN socket for external ON/OFF | ||
| Regeneration heating design | ||
| Electric resistance | ||
| Electric PTC | ||
| Saturated vapour (4 bar) | ||
| Gas | ||
| Air pre- and post-treatment | ||
| Pre-cooling | ||
| After-cooling | ||
| Pre-heating | ||
| After-heating | ||
| Mobility | ||
| Transport frame | ||
| Swivel casters with brake | ||
| Trestle rollers/ fixed castors | ||
| Crane lifting gear | ||
| Forklift pockets | ||
standard equipment
optionally available
not available
Accessories
Downloads
TROTEC CASE STUDY: Reliable air dehumidification against condensation (DE)
V02-DE-Case_Study_Luftentfeuchtung_MareDeus_HS-DE-... (449 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (EN)
Case_Study_Luftentfeuchtung_MareDeus_HS-EN-001.pdf (631 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (ES)
Case_Study_Luftentfeuchtung_MareDeus_HS-ES-001.pdf (454 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (FR)
Case_Study_Luftentfeuchtung_MareDeus_HS-FR-001.pdf (642 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (IT)
Case_Study_Luftentfeuchtung_MareDeus_HS-IT-001.pdf (639 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (NL)
Case_Study_Luftentfeuchtung_MareDeus_HS-NL-001.pdf (637 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (PL)
Case_Study_Luftentfeuchtung_MareDeus_HS-PL-001.pdf (625 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (TR)
Case_Study_Luftentfeuchtung_MareDeus_HS-TR-001.pdf (631 KB)
Operating manual for desiccant dehumidifiers TTR 5200 / TTR 6600 / TTR 8200 (INT)
TRT-BA-TTR5200-TTR6600-TTR8200-TC-001-INT.pdf (4.04 MB)
Further information, guides, practial tips and capacity calculations
In our detailed product-catalogue websites you will find detailed information about the product, practical tips, guides for usage and, in some categories, capacity calculator for the perfect dimensioning.
Similar products
Why you can trust Trotec
As one of the leading international manufacturers of air treatment solutions, Trotec offers industrial and commercial customers innovative products for air purification, dehumidification, heating, air conditioning and ventilation. For our high-performance devices, we rely 100 % on research, development, design and production in Germany. For the highest quality standards, sophisticated system solutions and fresh ideas.
People. Technology. Product.
What we do, we do with passion. And with real conviction. We are always there when it comes to climate. Find out more in our video.