TTR Cargo including TTR 8200 Adsorption Dryer
Availability: Delivery time on request
TTR Cargo including TTR 8200 adsorption dryer
The TTR Cargo is a ready-to-go all-weather trailer solution for mobile drying applications with high capacities, for example in the case of drying large new buildings, renovation sites or as a fast, temporary replacement for faulty stationary equipment.
For this purpose, the free standing box trailer in tandem version is equipped with a transport-proof built-in adsorption drying unit - ready for the hose connection.
Depending on the capacity requirement, the TTR Cargo is available in combination with the adsorption drying units TTR 5200, 6600 or 8200.
Combined with the TTR 8200 adsorption dryer, a mobile solution with up to 8,200 m³/h of dry air and a dehumidifying capacity of up to 1.109 liters per day is available.
Equipment details TTR Cargo:
- Robust and easy-to-clean construction with hot-galvanized chassis, forklift pockets, support wheel and two support feet
- All controls quickly accessible behind lockable front flap
- Additional storage compartment for accessories such as air transport hoses, etc.
- All service flaps are equipped with gas springs
- Easily accessible aluminium roller shutter with lock
- Integrated lifting module for easy removal of the adsorption drying unit for service work, etc.
- Box chassis can be completely removed from the trailer if required
Technical details:
- Combineable adsorption drying units: TTR 5200, TTR 6600, TTR 8200
- Performance data: depending on the combined TTR model, see technical data TTR 5200, 6600 or 8200
- Dimensions (L x W x H): 4.400 x 2.100 x 2.900 mm
- Tensile weight: 1,950 kg (including drying unit)
TTR 8200 Adsorption Dryer
Due to inegrated heat recovery, and the electric energy management rank the TTR 8200 and the rest of the TTR-adsorption dehumidifiers among the most efficient of their kind!
Because of the robust housing and the technology, following highest industrial standards even under rough conditions the TTR 8200 is a reliable dehumidifier.
Benefits in practice:
- Professional quality „made in Germany"
- High dehumidification performance even at low temperatures
- Reliable silicagel sorption rotors in a washable and mechanically high-tensile design
- Integrated heat recycling process
- Electrical regeneration heaters
Standard equipment characteristics of TTR 8200 at a glance:
- Steel housing, galvanized and painted
- Produced with condiseration of weather protection
- Wide range power supply
- Contol of rotor turning (rotor and motor)
- Overheat safety system with restart lock-out (regenaration air)
- Management of operating temperature
- Filter control (air flow and collect warning lights )
- Duoventic-control*
- Configurable change of direction of the air stream (conversion with little effort)
- Connecting terminals external on/off
- Hygrostat with connecting terminals
- Floating contacts (operation, disruption, filter)
Technical data of TTR 8200:
- Dehumidification performance: 46,2 kg/h
- Dry air flow rate: 9.000 m³/h by 400 Pa
- Electrical connection: 3x 400 V / 50 Hz
- Heater of regenerated air: 57 kW
- Power consumption max.: 64,5 kW
- Dimensions LxWxH: 1.750 x 1.100 x 1.700 mm
- Weight: 750 kg
- Connections dry air inlet/outlet Ø: 500 / 500 mm
- Connections regenerated air inlet/outlet Ø: 300 / 300 mm
Possible additional options:
- Flowmatic
- Humidity and temperature control
- Dew point sensor -80 °C ... +20 °C
- Touchscreen for control of the device
- Remote connection GSM
- Remote connection WLAN
- Heat exchanger module
- Electric reheater for dry air
- External Hygrostat HG 120
- External Hygrostat HG 125
- Transportframe (stackable), with wheels
*Due to Duoventic the performance of each fan is independently adjustable by means of potentiometer, also the dampers are not needed
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.110.000.190 | |
| Dry air (in case of intake air 20°C / 60 % RH) | ||
| Dehumidification [kg/24h] | 1,108.8 | |
| Dehumidification [kg/h] | 46.2 | |
| Air volume free-blowing [m³/h] | 9,000 | |
| Nominal air volume | Dry air (in case of intake air 20 °C / 60 % RH) [m³/h] | 8,200 | |
| External compression | Dry air (in case of intake air 20 °C / 60 % RH) [Pa] | 400 | |
| Connection inlet Ø [mm] | Dry air (in case of intake air 20 °C / 60 % RH) | 500 | |
| Connection outlet Ø | Dry air (in case of intake air 20 °C / 60 % RH) [mm] | 500 | |
| Regeneration air | ||
| Nominal air volume | Regeneration air [m³/h] | 1,660 | |
| External compression | Regeneration air [Pa] | 300 | |
| Connection inlet Ø | Regeneration air [mm] | 300 | |
| Connection outlet Ø | Regeneration air [mm] | 300 | |
| Operating principle | ||
| Operating principle | TTR Trisorp Dual | |
| Operating range | ||
| Min. temperature [°C] | -20 | |
| Max. temperature [°C] | 40 | |
| Min. humidity [% RH] | 0 | |
| Max. humidity [% RH (non-condensing)] | 100 | |
| Electrical values | ||
| Mains connection | 380 - 480 V/50 - 60 Hz | |
| Nominal current consumption [A] | 93.5 | |
| Installed capacity [kW] | 64.5 | |
| Heating capacity [kW] | 57 | |
| Recommended fusing [A] | 125 | |
| Electric connection | ||
| Terminal connection | ||
| Automatic dehumidification | ||
| Non-stop dehumidification | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 1,919 | |
| Width (packaging excluded) [mm] | 1,110 | |
| Height (packaging excluded) [mm] | 1,680 | |
| Weight | ||
| (packaging excluded) [kg] | 750 | |
| Equipment, features and functions | ||
|---|---|---|
| Housing type | ||
| Steel housing, galvanized and painted | ||
| Plastics | ||
| Metal plastic composite housing | ||
| Powder coating | ||
| Stainless steel | ||
| Device version | ||
| Indoor installation (standard) | ||
| Shelter against the weather | ||
| Hiring model | ||
| stackable | ||
| Equipment | ||
| Wide-range voltage | ||
| Rotor rotation control (rotor and drive) | ||
| Overtemperature protection system with restart lock (regeneration air) | ||
| Operating temperature management (regeneration air) | ||
| Filter monitoring (per air current and collective warning light) | ||
| Duoventic control | ||
| Configurable air direction reversal (conversion requires minimal effort) | ||
| Terminals for external ON/OFF | ||
| Terminals hygrostat | ||
| Potential-free contacts (operation, fault, filter) | ||
| Operating hours counter | ||
| Air volume regulation | ||
| Integrated heat recovery | ||
| Sensor-supported Flowmatic control | ||
| Hygrostat (electronic) | ||
| Hygrostat (mechanical) | ||
| Moisture control | ||
| Moisture and temperature registration | ||
| Power meter | ||
| Ammeter | ||
| DIN socket for external ON/OFF | ||
| Regeneration heating design | ||
| Electric resistance | ||
| Electric PTC | ||
| Saturated vapour (4 bar) | ||
| Gas | ||
| Air pre- and post-treatment | ||
| Pre-cooling | ||
| After-cooling | ||
| Mobility | ||
| Carry/transport handle(s) | ||
| Non-marking rubber wheels | ||
| Stacking device | ||
| Non-marking rubber feet | ||
| Transport frame | ||
| Swivel casters with brake | ||
| Trestle rollers/ fixed castors | ||
| Crane lifting gear | ||
| Forklift pockets | ||
standard equipment
optionally available
not available
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 6.100.010.550 | |
| Axles | 2 | |
| Braked | ||
| Max. additional load with built-in dryer [kg] | 100 | |
| Maximum speed in [km/h] | 100 | |
| Dimensions | ||
| Length Including superstructure [mm] | 4,400 | |
| Width Including superstructure [mm] | 2,100 | |
| Height Including superstructure [mm] | 2,900 | |
| Weight | ||
| Without superstructure [kg] | 600 | |
| Superstructure [kg] | 630 | |
| Including superstructure [kg] | 1,230 | |
| Max. additional load dryer [kg] | 750 | |
| (incl. industrial desiccant dehumidifier) [kg] | 1,950 | |
standard equipment
optionally available
not available
TROTEC CASE STUDY: Reliable air dehumidification against condensation (DE)
V02-DE-Case_Study_Luftentfeuchtung_MareDeus_HS-DE-... (449 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (EN)
Case_Study_Luftentfeuchtung_MareDeus_HS-EN-001.pdf (631 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (ES)
Case_Study_Luftentfeuchtung_MareDeus_HS-ES-001.pdf (454 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (FR)
Case_Study_Luftentfeuchtung_MareDeus_HS-FR-001.pdf (642 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (IT)
Case_Study_Luftentfeuchtung_MareDeus_HS-IT-001.pdf (639 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (NL)
Case_Study_Luftentfeuchtung_MareDeus_HS-NL-001.pdf (637 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (PL)
Case_Study_Luftentfeuchtung_MareDeus_HS-PL-001.pdf (625 KB)
TROTEC CASE STUDY: Reliable air dehumidification against condensation (TR)
Case_Study_Luftentfeuchtung_MareDeus_HS-TR-001.pdf (631 KB)
Operating manual for desiccant dehumidifiers TTR 5200 / TTR 6600 / TTR 8200 (INT)
TRT-BA-TTR5200-TTR6600-TTR8200-TC-001-INT.pdf (4.04 MB)
