Smoke chamber stainless steel V2 + 10x smoke cartridge (white)
Availability: Immediately available
Stainless steel smoke chamber V2 + 10x smoke cartridges (white)
Stainless steel smoke chamber for flat roof leak detection. Via the smoke chamber, the special smoke is blown into the insulation layer.
If the creation of a ring line or the sufficient wetting of the waterproofing membrane is too costly or not possible, the use of the flue gas method is an option. The method is characterized by the simplest and quickest application.
The removable combustion basket enables better cleaning of the complete chamber.
With the help of the readjustable sealing cover, a permanent chamber seal is ensured.
The flue gas cartridges, which are available as accessories, produce a dense white/red smoke and have a burning time of approx. 80 seconds.
- Dimensions (L x W x H): 150 x 230 x 165 mm .
- Weight: 3.06 kg
- Inlet/outlet nozzle diameter: 38 mm
Please note that the yellow plug shown in the product images is not included!
Smoke cartridge, white
The smoke cartridge produces a very dense (white) mist which is blown into the insulation layer for leak testing.
Possible uses besides leak testing in insulation drying include:
- Photography and filming .
- Airflow testing
- Other functional and leakage tests .
Technical details:
- Gross weight: approx. 203 g .
- NEM (net explosive mass): 75 g .
- Dimensions (height / diameter): approx. 12 cm / 5 cm
- Burn time: about 80 seconds .
Safety instructions:
- Smoke harmful to health when inhaled .
- Place/fix smoke torch vertically on fireproof, level surface so that it cannot fall over .
- Stand sideways so ignite at far end of fuse so that no part of body is over smoke cartridge and remove sufficiently immediately .
- The safety distance from persons and highly flammable materials must be at least 1 meter in all directions .
- Do not ignite near sensitive objects or crowds. Smoke may contain traces of paint .
Please note: In Germany, the distribution to persons under 18 years is prohibited!
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 3.510.010.030 | |
standard equipment
optionally available
not available
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 3.510.010.035 | |
| Flue gas | ||
| Generator principle | Fog & flue gas | Flue gas chamber | |
| Burning time of each flue gas cartridge | Approx. 90 s | |
| Interfaces | ||
| Process connection - (Ø 38 mm) | ||
| Housing design | ||
| Metal | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 150 | |
| Width (packaging excluded) [mm] | 230 | |
| Height (packaging excluded) [mm] | 165 | |
| Weight | ||
| (packaging excluded) [kg] | 3.06 | |
| Standard scope of delivery | ||
|---|---|---|
| Standard scope of delivery | ||
| Generator | ||
| Operating manual | ||
| Fog hose (5 m, plastic, Ø 38 mm) | ||
| Adapter turbine connector to reduce the diameter from 50 to 38 mm | ||
| Fluid hose with coupling | ||
| Filling pipe | ||
| 5 l of fog fluid in canister | ||
standard equipment
optionally available
not available
