Infrared heater IR 2010 S
Availability: Immediately available
Infrared heater IR 2010 S
Three-stage infrared heat (max. 2,000 W) for wall or tripod mounting outdoors - with remote control, LED display and timer
Modern look and warmth for covered outdoor areas.
What could be better than spending cozy warm moments on the sun-drenched terrace or balcony. So that you or your guests can enjoy this outdoor luxury on cool days and even in the icy winter, the infrared radiant heater IR 2010 S provides soothing heat according to the natural principle of the sun.
Summer temperatures at any time of the year
Whether as a source of heat for private living areas, to use covered terraces, balconies or loggias as an extended living space all year round, for trade fairs or open-air events, or for high-turnover outdoor catering in the winter season - the IR 2010 S, which is impressive both visually and in terms of its heat output, combines modern looks with powerful warmth. The ultra-flat radiant heater impresses at first glance with its modern and straightforward design. The color matte black gives the infrared heater cool elegance, while the three-stage selectable direct heat up to 8 - 14 square meters of large, covered outdoor areas properly heated. The best conditions for temperature-independent oases of well-being outdoors. Optimal for common family meals on the domestic terrace, for social meetings with friends outside on the balcony or pleasantly tempered seats in the external catering trade - a noticeable turnover plus in the cold season.
Can be used as a floor or wall-mounted radiant heater
The infrared heater is just as flexible as its application possibilities when it comes to the way it is mounted. As a wall-mounted radiant heater, the IR 2010 S provides seating groups and bar tables with targeted heat. For uncomplicated mounting, a 45° swiveling bracket with screws and dowels is included in the scope of delivery. The radiant heater, which is equipped with a 1.80 m power cable, can also be attached to tripods to further extend the radius of use.
Warmth and well-being at the touch of a button
The high-quality carbon infrared tube of the 735 mm long radiant heater exudes a pleasant, noticeable warmth on the skin immediately after it is switched on, without any warm-up phase and before the heating element actually turns red. Another characteristic of carbon tubes is their long service life, as they achieve an operating time of over 10,000 hours. To adjust the heat intensity, the IR 2010 S has three heating levels with up to 2,000 watts, switchable via the integrated control panel or the supplied remote control. The LED display clearly shows the set power level (P1: 650 W / P2: 1,350 W / P3: 2,000 W).
Enjoyment in the fresh air - the IR 2010 S infrared heater is the economically attractive solution for making covered outdoor areas usable all year round.
Warm temperatures made plannable
For energy-saving programming of a predefined operating time, the IR 2010 S has a practical 24-hour timer. Once set, the radiant heater switches off fully automatically after a predefined number of hours (1-24 hours). This reduces unnecessary operating costs and simplifies use in commercial applications in particular. Another plus point for professional use is the design aluminum housing constructed according to protection class IP34, which reliably protects the device technology of the robust infrared heater from splashing water.
Infrared heat: As pleasant and natural as the sun
The infrared radiator IR 2010 S heats its direct environment according to the natural principle of the sun. In contrast to devices with heating wires, the infrared rays of the carbon heating element of the IR 2010 S do not heat the surrounding air, but only the surfaces and persons they hit. The illuminated objects (for example furniture, walls and ceilings) absorb the heat and store it, then gradually release it again. The objects thus serve as an additional energy and heat reservoir - even when the device is switched off, which further increases the efficiency of the IR 2010 S infrared radiator. The heat radiation creates on the skin a pleasant feeling of warm sun rays in summer.
Every person feels temperatures differently. Our individual perception of warmth is influenced, for example, by the distance to the heat source. The smaller the distance to the radiant heater, the smaller the irradiated area - the greater the distance to the radiant heater, the larger the irradiated area. The 2,000 watt IR 2010 S infrared heater is recommended for areas in covered outdoor spaces of approximately 8 m² to 14 m². Please make sure that the area to be heated is protected from the wind, otherwise the heating effect may be neutralized by the air flow.
As clean as nature - without disturbing emissions
In particular, allergy sufferers and people with sensitive respiratory tracts will feel the benefits of the infrared heater soothingly and no longer want to miss. The clean and condensation-free instant heat is generated without dust whirling up, disturbing noises and unpleasant odors, in contrast to electric heaters.
Practical advantages:
- Infrared heat without preheating
- High-quality and long-lasting carbon infrared tube (10,000 hours of illumination)
- Uniform and targeted heat distribution
- Clean, condensation-free, odorless and completely noiseless
- No dust whirling up, therefore suitable for allergy sufferers
- 3 power levels with up to 2,000 watts of heating power
- 24-hour timer for fully automatic shut-off
- Infrared remote control
- High-quality, noble design
- Weather resistant aluminum
- Splash-proof (protection class IP34) for covered outdoor areas
- Adjustable 45° tilt angle - with large field of action
- LED display
- Operation control lamp
- Swivel mounting bracket included
- Suitable for wall and tripod mounting
- Energy efficient
Please note that the telecopic stand shown in the product images is not included!
Up to 90% state subsidy possible through bridging aid IV
Companies in the retail, event and culture, hotel, gastronomy and pyrotechnics industries, companies in the wholesale and travel industries, freelancers as well as non-profit companies and organizations can receive a staggered subsidy of up to 90% of the acquisition costs depending on the drop in sales. The percentage fixed cost subsidy is based on the amount of the respective sales slump.
Technical data | ||
---|---|---|
General information | ||
Article number | 1.410.003.102 | |
Heating capacity | ||
in [W] | 2,000 | |
Level 1 [kW] | 0.65 | |
Level 1 [kW] | 1.35 | |
Level 3 [kW] | 2 | |
Level Max. [kW] | 2 | |
Electrical values | ||
Mains connection | 220 - 240 V/50 - 60 Hz | |
Nominal current consumption [A] | 8.7 | |
Electric connection | ||
Connection plug | CEE 7/7 | |
Cable length [m] | 1.8 | |
Housing design | ||
Aluminium | ||
Safety feature | ||
IP type of protection | IP34 | |
Control panel | ||
Digital display | ||
Control knobs | ||
LED display | ||
Dimensions | ||
Length (packaging excluded) [mm] | 85 | |
Width (packaging excluded) [mm] | 735 | |
Height (packaging excluded) [mm] | 155 | |
Weight | ||
(packaging excluded) [kg] | 3 |
Equipment, features and functions | ||
---|---|---|
Functions and features | ||
Infrared remote control | ||
ON/OFF switch | ||
Inclination [°] | 45 | |
Operating control lamp | ||
Timer function | ||
Wall mounting | ||
Ceiling mounting | ||
Installation on the umbrella stand | ||
Tripod |
standard equipment
optionally available
not available

Declaration of conformity radiant heater IR 2010 S (DE)
TRT-CE-IR2010S-HS-001-DE.pdf (110 KB)

Declaration of conformity radiant heater IR 2010 S (INT)
TRT-CE-IR2010S-HS-001-EN.pdf (110 KB)
Further information, guides, practial tips and capacity calculations
In our detailed product-catalogue websites you will find detailed information about the product, practical tips, guides for usage and, in some categories, capacity calculator for the perfect dimensioning.