IDS 45 Oil Fired Indirect Heater + External Thermostat
Availability: Currently not in stock
IDS 45 Oil Fired Indirect Heater + External Thermostat
Made in Europe: Package deal comprimises an IDS 45 oil fired indirect heater with a heating performance of 52.5 kW and an external thermostat with a 10 m long connection.
The sturdy indirect oil heating units in the IDS Series have everything they need to provide you with a super-fast and economic heating.
Because the oil heating units come with an integrated fuel tank you won't need any cumbersome or bulky external fuel tanks, giving you even more freedom and mobility when it comes to choosing the right place for installation.
The light yet sturdy undercarriage with extra-large wheels allows you to transport and install the units quickly and easily and because the units are so mobile they can be quickly and easily moved around building sites and over rough and bumpy terrain, even single-handedly if need be.
The units' solid and strikingly simple construction guarentees a reassuringly high level of reliability and a blissfully low level of maintenance.
Needles to say safety is always first and foremost with the oil heating units in the IDS Series:
The units are standard-equipped with an electronic flame safeguard, safety thermostat for overheat protection and fully automatic aftercooling. The double-walled, paint protected housing does much to ensure an effective reduction in noise while at the same time significantly reducing a real risk of injury in the workplace, because the outer casing has a much lower surface temperature.
More technical data of the IDS 45:
- Heating capacity: 52.5 kW
- Temperature increase ΔT: 66 °C
- Air flow rate: 2,500 m³/h
- Input voltage: 230 V / 50 Hz
- Current consumption: 3.8 A
- Power socket: Schuko / CEE 7/7
- Fuel consumption max.: 5.59 l/h
- Air transport hose adaptor ø: 1 x 350 mm; 2 x 300 mm
- Chimney connection ø: 150 mm
- Tank capacity: 65 litres
- Length x width x height: 1,310 x 510 x 965 mm
- Weight: 81 kg
Available accessories:
- Connecting kit for external oil tank (available on request)
- Oil preheating (available on request)
- Hose connection points
- Two-way hose distributor connecting piece (available on request)
- Tank level indicator (available on request)
- Oil filter filler neck (available on request)
External Thermostat
If the temperature should be measured and controlled at a place with a distance of 10 meters away from the heater you can use the extern thermostat.
Technical data | ||
---|---|---|
General information | ||
Article number | 1.430.000.130 | |
Functional principle | ||
Method of heating indirect | ||
Oil | ||
Method of heating direct | ||
Air flow rate | ||
Level Max. [m³/h] | 2,500 | |
Fan | ||
axial | ||
Radial | ||
Nominal heat input | ||
Level Max. [kW] | 58.6 | |
Nominal heat output | ||
Level Max. [kW] | 52.5 | |
Level Max. [kcal] | 45,142 | |
Temperature increase | ||
Level Max. [°C] | 66 | |
Electrical values | ||
Mains connection | 230 V, 50 Hz | |
Current consumption [A] | 3.8 | |
Power input [kW] | 0.85 | |
Heating capacity [kW] | 52.5 | |
Electric connection | ||
Connection plug | CEE 7/7 (plug type F + E) | |
Cable length [m] | 1.2 | |
Operation | ||
Overheating protection | ||
Connection for external thermostat | ||
Internal thermostat | ||
Fuel feed | ||
Fuel feed | Danfoss pump | |
Fuel filter | ||
Available | ||
Oil consumption | ||
Level Max. [l/h] | 5.59 | |
Tank contents | ||
Content in [l] | 65 | |
Hose connection | ||
Diameter | Hose connection [mm] | 350 | |
Chimney connection | ||
Available | ||
Diameter | Chimney connection [mm] | 150 | |
Sound values | ||
Distance 1 m [dB(A)] | 72 | |
Suitable fuels | ||
Kerosene | ||
Diesel | ||
EL fuel oil | ||
Low-sulphur EL fuel oil | ||
Dimensions | ||
Length (packaging excluded) [mm] | 1,310 | |
Width (packaging excluded) [mm] | 510 | |
Height (packaging excluded) [mm] | 965 | |
Weight | ||
(packaging excluded) [kg] | 81 |
Equipment, features and functions | ||
---|---|---|
Mobility | ||
Carry/transport handle(s) | ||
Plastic wheels | ||
Rubber-tyred metal wheels | ||
Forklift | ||
Crane | ||
Housing design | ||
Steel | ||
Stainless steel |
standard equipment
optionally available
not available
Technical data | ||
---|---|---|
General information | ||
Article number | 6.100.007.015 |
standard equipment
optionally available
not available

Ratgeber Praxiswissen Profi-Beheizung (DE)
TRT-Ratgeber-Profi-Beheizung-HS-DE.pdf (3.98 MB)

Operating manual for oil heating units IDS 45 / IDS 80 (DA)
TRT-BA-IDS45-IDS80-TC-004-DA.pdf (3.87 MB)

Operating manual for oil heating units IDS 45 / IDS 80 (DE)
TRT-BA-IDS45-IDS80-TC-004-DE.pdf (3.87 MB)

Operating manual for oil heating units IDS 45 / IDS 80 (EN)
TRT-BA-IDS45-IDS80-TC-004-EN.pdf (3.86 MB)

Operating manual for oil heating units IDS 45 / IDS 80 (FR)
TRT-BA-IDS45-IDS80-TC-004-FR.pdf (3.87 MB)

Operating manual for oil heating units IDS 45 / IDS 80 (NO)
TRT-BA-IDS45-IDS80-TC-004-NO.pdf (3.87 MB)

Operating manual for oil heating units IDS 45 / IDS 80 (PL)
TRT-BA-IDS45-IDS80-TC-004-PL.pdf (3.86 MB)

Operating manual for oil heating units IDS 45 / IDS 80 (SV)
TRT-BA-IDS45-IDS80-TC-004-SV.pdf (3.87 MB)

Operating manual for oil heating units IDS 45 / IDS 80 (TR)
TRT-BA-IDS45-IDS80-TC-004-TR.pdf (3.88 MB)