Oil heater fan IDE 60
Availability: Available again from week 41
Payment in installments
PayPal Buy Now Pay Later is not available to pay for subscriptions.
Oil heater fan IDE 60
The IDE 60 oil heater fan with a nominal heat output of 60 kW (51,600 kcal) and an air volume of 2000 m³/h. The consumption is a maximum of 5.6 liters of oil per hour.
Large, clean and dry hot air volumes thanks to the 60 kW heating power of a heater that is as solid as it is inexpensive - the IDE 60 oil heater fan is the perfect price and heating cannon in one device and our best recommendation as a reliable budget solution for typical oil heating applications on construction sites, in halls and workshops or in agriculture.
The IDE 60 oil heater blower is able to cope with longer outdoor applications with ease, as it has a hard-wearing housing made of double-painted material, supported by a smooth-running trolley construction with cable collectors and an installed fuel tank.
And when used with the optional flue gas exhaust, this heater can also be used flexibly to heat enclosed spaces.
The IDE 60 can be variably fired with diesel or fuel oil as fuel, the constant supply of which is guaranteed by a high-quality Danfoss injection pump. The external fuel filter allows easy access and the current fuel quantity can be conveniently read on the level indicator integrated in the tank.
For temperature control, a thermostat with digital dual display for setpoint and actual value is permanently installed; in addition, an optional external thermostat with 25-meter connection cable can be supplied if the oil heater fan is to be placed away from the area to be heated.
IDE indirect oil heaters - maximum heating power, clean heat
The IDE series of indirect oil heaters are ideally suited for rooms where only limited ventilation is possible, but which are still ventilation is possible, but which are still to be used by people and animals. animals. They are also a good choice for accelerating the drying of and in rooms where there is a risk of fire due to the presence of flammable fire hazard due to the presence of flammable materials.
In indirect heaters, the air to be heated is completely separated from the combustion chamber.
The air is heated by passing over the enlarged surface of the combustion chamber, the heat exchanger. The blower blowing out the warm air also provides the required combustion air, but the combustion combustion air, but the combustion products are exhausted to the outside through a chimney to the outside.
Therefore, to obtain clean and at the same time dry heat, it is recommended to use indirect heaters.
Unlike direct heaters, no combustion products or water vapor are released into the room air.
or water vapor into the room air, provided that the optionally available flue gas
flue gas exhaust system is used.
Advantages in practice:
- Particularly economical solution for standard oil-fired heating systems
- Integrated fuel tank with level indicator
- Electronic flame safeguard
- Overheating protection
- Stainless steel combustion chamber
- Integrated thermostat with dual display for actual and setpoint value
- Connection for external thermostat
- Mobile base for easy relocation
Technical data | ||
---|---|---|
General information | ||
Article number | 1.430.000.235 | |
Functional principle | ||
Method of heating indirect | ||
Oil | ||
Method of heating direct | ||
Air flow rate | ||
Level Max. [m³/h] | 2,000 | |
Fan | ||
axial | ||
Radial | ||
Nominal heat output | ||
Level Max. [kW] | 60 | |
Level Max. [kcal] | 51,600 | |
Temperature increase | ||
Level Max. [°C] | 90 | |
Electrical values | ||
Mains connection | 230 V, 50 Hz | |
Current consumption [A] | 3.2 | |
Power input [kW] | 0.9 | |
Heating capacity [kW] | 60 | |
Electric connection | ||
Connection plug | CEE 7/7 | |
Cable length [m] | 1.2 | |
Operation | ||
Internal thermostat | ||
Connection for external thermostat | ||
Temperature indication | ||
Overheating protection | ||
Fuel feed | ||
Fuel feed | Danfoss pump | |
Fuel filter | ||
Available | ||
Oil consumption | ||
Level Max. [l/h] | 5.7 | |
Tank contents | ||
Content in [l] | 68 | |
Hose connection | ||
Diameter | Hose connection [mm] | 400 | |
Chimney connection | ||
Available | ||
Diameter | Chimney connection [mm] | 150 | |
Sound values | ||
Distance 1 m [dB(A)] | 79 | |
Suitable fuels | ||
Diesel | ||
EL fuel oil | ||
Low-sulphur EL fuel oil | ||
Kerosene | ||
Dimensions | ||
Length (packaging excluded) [mm] | 1,370 | |
Width (packaging excluded) [mm] | 560 | |
Height (packaging excluded) [mm] | 995 | |
Weight | ||
(packaging excluded) [kg] | 59 |
Equipment, features and functions | ||
---|---|---|
Mobility | ||
Carry/transport handle(s) | ||
Plastic wheels | ||
Rubber-tyred metal wheels | ||
Forklift | ||
Crane | ||
Housing design | ||
Steel |
standard equipment
optionally available
not available











Ratgeber Praxiswissen Profi-Beheizung (DE)
TRT-Ratgeber-Profi-Beheizung-HS-DE.pdf (3.98 MB)

Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (CS)
TRT-BA-IDE20-30-50-60-80-TC-009-CS.pdf (3.25 MB)

Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (DE)
TRT-BA-IDE20-30-50-60-80-TC-009-DE.pdf (3.25 MB)

Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (EN)
TRT-BA-IDE20-30-50-60-80-TC-009-EN.pdf (3.24 MB)

Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (ES)
TRT-BA-IDE20-30-50-60-80-TC-009-ES.pdf (2.31 MB)

Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (FR)
TRT-BA-IDE20-30-50-60-80-TC-009-FR.pdf (3.25 MB)

Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (HR)
TRT-BA-IDE20-30-50-60-80-TC-009-HR.pdf (3.24 MB)

Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (IT)
TRT-BA-IDE20-30-50-60-80-TC-009-IT.pdf (3.25 MB)

Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (NL)
TRT-BA-IDE20-30-50-60-80-TC-009-NL.pdf (3.25 MB)

Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (PL)
TRT-BA-IDE20-30-50-60-80-TC-009-PL.pdf (3.25 MB)

Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (SK)
TRT-BA-IDE20-30-50-60-80-TC-009-SK.pdf (3.25 MB)

Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (SL)
TRT-BA-IDE20-30-50-60-80-TC-009-SL.pdf (3.25 MB)

Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (TR)
TRT-BA-IDE20-30-50-60-80-TC-009-TR.pdf (3.25 MB)