Oil heater fan IDE 50
Availability: Immediately available
Oil heater fan IDE 50
The IDE 50 oil heater fan with a nominal heat output of 50 kW (44,100 kcal) and an air volume of 2000 m³/h. The consumption is maximum 4.7 liters of oil per hour.
Frequently bought together
Total
Indirectly fired air heaters such as the IDE 50 oil heater fan are optimal solutions for providing large, clean and dry quantities of hot air, as required for heating construction sites, marquees, exhibition halls, workshops or stables.
The IDE 50 oil heater blower can easily cope with prolonged outdoor use. because it has a durable housing made of double-painted material, supported by a light material, supported by a smooth-running trolley construction with cable trolley construction with cable supports and installed fuel tank. fuel tank.
And when used with the optionally available flue gas exhaust, this heater can be this heater can also be used flexibly for the fully automatic heating of of closed rooms.
For temperature control, a thermostat with digital dual display for setpoint and actual value, and an optional external thermostat with a thermostat with a 25-meter connection cable can be supplied if the oil heater the oil heater fan is to be installed away from the area to be heated.
The firing of the IDE 50 can be done variably with diesel or fuel oil as fuel, the constant fuel, the constant supply of which is ensured by a high-quality Danfoss Danfoss injection pump. The external fuel filter fuel filter on the outside allows easy access and the current fuel quantity can be be conveniently read off from the level indicator integrated in the tank.
IDE indirect oil heaters - maximum heating power, clean heat
The indirect oil heaters of the IDE series are ideally suited for rooms where only limited ventilation is possible, but which nevertheless ventilation is possible, but which are still to be used by people and animals. animals. They are also a good choice for accelerating the drying of and in rooms where there is a risk of fire due to the presence of flammable fire hazard due to the presence of flammable materials.
The air is heated by passing it through the enlarged surface of the combustion chamber, the heat exchanger. The blower blowing out the warm air also provides the required combustion air, but the combustion air, but the combustion products are exhausted to the outside through a chimney to the outside.
Thus, to obtain clean and at the same time dry heat, it is recommended to use indirect heaters.
In contrast to direct heaters, no combustion products or water vapor are released into the air. or water vapor into the room air, provided that the optionally available flue gas flue gas exhaust system is used.
Advantages in practice:
- Particularly economical solution for standard oil-fired heating systems
- Integrated fuel tank with level indicator
- Electronic flame safeguard
- Overheating protection
- Stainless steel combustion chamber
- Integrated thermostat with dual display for actual and setpoint value
- Connection for external thermostat
- Mobile base for easy relocation
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.430.000.230 | |
| Functional principle | ||
| Method of heating indirect | ||
| Oil | ||
| Method of heating direct | ||
| Air flow rate | ||
| Level Max. [m³/h] | 2,000 | |
| Fan | ||
| axial | ||
| Radial | ||
| Nominal heat output | ||
| Level Max. [kW] | 50 | |
| Level Max. [kcal] | 44,100 | |
| Temperature increase | ||
| Level Max. [°C] | 95 | |
| Electrical values | ||
| Mains connection | 230 V, 50 Hz | |
| Current consumption [A] | 3.2 | |
| Power input [kW] | 0.9 | |
| Heating capacity [kW] | 50 | |
| Electric connection | ||
| Connection plug | CEE 7/7 | |
| Cable length [m] | 1.1 | |
| Operation | ||
| Internal thermostat | ||
| Connection for external thermostat | ||
| Temperature indication | ||
| Overheating protection | ||
| Fuel feed | ||
| Fuel feed | Danfoss pump | |
| Fuel filter | ||
| Available | ||
| Oil consumption | ||
| Level Max. [l/h] | 4.8 | |
| Tank contents | ||
| Content in [l] | 68 | |
| Hose connection | ||
| Diameter | Hose connection [mm] | 400 | |
| Chimney connection | ||
| Available | ||
| Diameter | Chimney connection [mm] | 150 | |
| Sound values | ||
| Distance 1 m [dB(A)] | 79 | |
| Suitable fuels | ||
| Diesel | ||
| EL fuel oil | ||
| Low-sulphur EL fuel oil | ||
| Kerosene | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 1,365 | |
| Width (packaging excluded) [mm] | 600 | |
| Height (packaging excluded) [mm] | 985 | |
| Weight | ||
| (packaging excluded) [kg] | 60.5 | |
| Equipment, features and functions | ||
|---|---|---|
| Mobility | ||
| Carry/transport handle(s) | ||
| Plastic wheels | ||
| Rubber-tyred metal wheels | ||
| Forklift | ||
| Crane | ||
| Non-marking full-rubber wheels | ||
| Housing design | ||
| Steel | ||
standard equipment
optionally available
not available
Ratgeber Praxiswissen Profi-Beheizung (DE)
TRT-Ratgeber-Profi-Beheizung-HS-DE.pdf (3.98 MB)
Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (CS)
TRT-BA-IDE20-30-50-60-80-TC-009-CS.pdf (3.25 MB)
Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (DE)
TRT-BA-IDE20-30-50-60-80-TC-009-DE.pdf (3.25 MB)
Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (EN)
TRT-BA-IDE20-30-50-60-80-TC-009-EN.pdf (3.24 MB)
Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (ES)
TRT-BA-IDE20-30-50-60-80-TC-009-ES.pdf (2.31 MB)
Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (FR)
TRT-BA-IDE20-30-50-60-80-TC-009-FR.pdf (3.25 MB)
Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (HR)
TRT-BA-IDE20-30-50-60-80-TC-009-HR.pdf (3.24 MB)
Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (IT)
TRT-BA-IDE20-30-50-60-80-TC-009-IT.pdf (3.25 MB)
Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (NL)
TRT-BA-IDE20-30-50-60-80-TC-009-NL.pdf (3.25 MB)
Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (PL)
TRT-BA-IDE20-30-50-60-80-TC-009-PL.pdf (3.25 MB)
Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (SK)
TRT-BA-IDE20-30-50-60-80-TC-009-SK.pdf (3.25 MB)
Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (SL)
TRT-BA-IDE20-30-50-60-80-TC-009-SL.pdf (3.25 MB)
Operating manual for oil heating units IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80 (TR)
TRT-BA-IDE20-30-50-60-80-TC-009-TR.pdf (3.25 MB)
Further information, guides, practial tips and capacity calculations
In our detailed product-catalogue websites you will find detailed information about the product, practical tips, guides for usage and, in some categories, capacity calculator for the perfect dimensioning.