Direct oil heater fan IDE 50 D
Availability: Immediately available
Direct oil heater blower IDE 50 D
The IDE 50 D oil heater fan with a nominal heat output of 50 kW (44,100 kcal) and an air volume of 750 m³/h. The consumption is maximum 4 liters of oil per hour.
Frequently bought together
Total
The IDE 50 D oil heater fan can provide large quantities of hot air directly where it is needed, making it particularly suitable for heating well-ventilated construction objects, factory areas or warehouses.
With its heavy-duty, double-painted housing, supported by a smooth-running trolley design with cable pick-ups and installed fuel tank, this oil heater blower is well prepared for outdoor heating applications and can be easily used in fully automatic continuous heating mode via thermostat.
The large air outlet of the IDE 50 D guarantees maximum warm air expansion with a high efficiency of 100%.
For temperature control, in addition to the permanently installed thermostat, an external thermostat is available as an optional accessory, which can also measure the temperature at a location to be heated that is up to 25 meters away from the oil heater fan.
IDE direct oil heaters - 100% heating power for outdoor areas
The IDE series direct oil heaters are ideal for outdoor use, for heating outdoor use, for heating outdoor construction sites, agricultural areas or in well ventilated indoor areas, because they provide the entire heat developed heat available. That's why direct-oil heaters don't have a chimney. Therefore, this process is also referred to as 100% performance, since the heating power has an efficiency of 100%.
In a direct-heat system, the blower that blows out the heated air also provides the combustion air.
First, fuel is atomized in the combustion chamber, ignited and burned. Subsequently, the hot gases are fed in a precise metering is mixed with the main air stream from the blower.
Thus, in addition to heat, direct heaters also emit combustion exhaust gases directly into the room. They are therefore unsuitable for closed rooms without good without good ventilation if there are people or animals in the room. should be present.
Because combustion also releases a lot of moisture,
direct heaters should never be used for drying out buildings.
Practical advantages:
- Particularly economical solution for standard oil-fired heating systems.
- Integrated fuel tank with level indicator
- Electronic flame safeguard
- Overheating protection
- Stainless steel combustion chamber
- Integrated thermostat
- Connection for external thermostat
- Mobile base for easy relocation
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.430.000.070 | |
| Functional principle | ||
| Method of heating direct | ||
| Oil | ||
| Method of heating indirect | ||
| Air flow rate | ||
| Level Max. [m³/h] | 750 | |
| Fan | ||
| axial | ||
| Radial | ||
| Nominal heat output | ||
| Level Max. [kW] | 50 | |
| Level Max. [kcal] | 43,000 | |
| Temperature increase | ||
| Level Max. [°C] | 180 | |
| Electrical values | ||
| Mains connection | 220 - 240 V, 50 Hz | |
| Current consumption [A] | 1.25 | |
| Power input [kW] | 0.9 | |
| Heating capacity [kW] | 51 | |
| Electric connection | ||
| Connection plug | CEE 7/7 (plug type F + E) | |
| Cable length [m] | 1.25 | |
| Operation | ||
| Internal thermostat | ||
| Connection for external thermostat | ||
| Overheating protection | ||
| Temperature indication | ||
| Fuel feed | ||
| Fuel feed | Compressor | |
| Oil consumption | ||
| Level Max. [l/h] | 4.8 | |
| Tank contents | ||
| Content in [l] | 38 | |
| Hose connection | ||
| Diameter | Hose connection [mm] | ||
| Chimney connection | ||
| Diameter [mm] | ||
| Available | ||
| Sound values | ||
| Distance 1 m [dB(A)] | 77 | |
| Suitable fuels | ||
| EL fuel oil | ||
| Low-sulphur EL fuel oil | ||
| Kerosene | ||
| Diesel | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 860 | |
| Width (packaging excluded) [mm] | 456 | |
| Height (packaging excluded) [mm] | 600 | |
| Weight | ||
| (packaging excluded) [kg] | 22 | |
| Equipment, features and functions | ||
|---|---|---|
| Mobility | ||
| Carry/transport handle(s) | ||
| Plastic wheels | ||
| Rubber-tyred metal wheels | ||
| Non-marking full-rubber wheels | ||
| Forklift | ||
| Crane | ||
| Housing design | ||
| Steel | ||
standard equipment
optionally available
not available
Ratgeber Praxiswissen Profi-Beheizung (DE)
TRT-Ratgeber-Profi-Beheizung-HS-DE.pdf (3.98 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (CS)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-CS.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (DA)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-DA.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (DE)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-DE.pdf (5.34 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (EN)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-EN.pdf (5.34 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (ES)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-ES.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (ET)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-ET.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (FI)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-FI.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (FR)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-FR.pdf (5.34 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (HR)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-HR.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (IT)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-IT.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (LT)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-LT.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (LV)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-LV.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 70 D (NL)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-NL.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (NO)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-NO.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (PL)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-PL.pdf (5.38 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (PT)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-PT.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (RO)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-RO.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (RU)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-RU.pdf (5.38 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (SV)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-SV.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (TR)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-TR.pdf (5.38 MB)
Further information, guides, practial tips and capacity calculations
In our detailed product-catalogue websites you will find detailed information about the product, practical tips, guides for usage and, in some categories, capacity calculator for the perfect dimensioning.