Direct oil heater fan IDE 30 D
Availability: Immediately available
Direct oil heater blower IDE 30 D
The IDE 30 D oil heater fan with a rated heat output of 30 kW (25,800 kcal) and an air volume of 720 m³/h. The consumption is a maximum of 2.8 liters of oil per hour.
Frequently bought together
Total
This oil heater fan has a durable housing made of double-painted material, supported by a smooth-running trolley construction with cable pick-ups and installed fuel tank - the best prerequisites for reliable continuous heating applications on frosty construction sites, in agriculture or well-ventilated storage areas.
A thermostat is permanently installed for temperature control; in addition, an external thermostat with a 25-meter connection cable can be supplied as an option if the oil heater fan is to be installed away from the area to be heated.
The current fuel level can be conveniently read at any time on the integrated tank level indicator.
If you are looking for a solid and reliable budget solution for typical continuous heating applications with direct heat on site, then the IDE 30 D oil heater fan is the optimal choice.
IDE direct oil heaters - 100% heating power for outdoor areas
The direct oil heaters of the IDE series are ideally suited for use outdoors outdoor, for heating outdoor construction sites, agricultural areas, or well-ventilated or in well-ventilated indoor areas, because they provide the entire heat developed heat available. That's why direct-oil heaters don't have a chimney. Therefore, this process is also referred to as 100% performance, since the heating power has an efficiency of 100%.
In a direct-heating system, the blower that blows out the heated air also provides the combustion air.
First, fuel is atomized in the combustion chamber, ignited and burned. Subsequently, the hot gases are fed in a precise mixed with the main air stream of the blower in a precise dosage.
Thus, in addition to heat, direct heaters also emit combustion exhaust gases directly into the room. They are therefore unsuitable for closed rooms without good without good ventilation if there are people or animals in the room. should be present.
Because combustion also releases a lot of moisture,
direct heaters should never be used for drying out buildings.
Here is an overview of some practical advantages:
- Particularly economical solution for standard oil heating systems
- Integrated fuel tank with level indicator
- Electronic flame safeguard
- Overheating protection
- Stainless steel combustion chamber
- Integrated thermostat
- Connection for external thermostat
- Mobile base for easy relocation
Also available as an option
- external thermostat for fully automatic operation
- Tank level indicator (on request)
- Filler neck oil filter (on request)
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.430.000.065 | |
| Functional principle | ||
| Method of heating direct | ||
| Oil | ||
| Method of heating indirect | ||
| Air flow rate | ||
| Level Max. [m³/h] | 720 | |
| Fan | ||
| axial | ||
| Radial | ||
| Nominal heat output | ||
| Level Max. [kW] | 30 | |
| Level Max. [kcal] | 25,800 | |
| Temperature increase | ||
| Level Max. [°C] | 210 | |
| Electrical values | ||
| Mains connection | 230 V/50 Hz | |
| Current consumption [A] | 1.247 | |
| Power input [kW] | 0.23 | |
| Heating capacity [kW] | 30 | |
| Electric connection | ||
| Connection plug | CEE 7/7 (plug type F + E) | |
| Cable length [m] | 1.2 | |
| Operation | ||
| Main switch | ||
| Internal thermostat | ||
| Connection for external thermostat | ||
| Overheating protection | ||
| Temperature indication | ||
| Fuel feed | ||
| Fuel feed | Compressor | |
| Oil consumption | ||
| Level Max. [l/h] | 2.8 | |
| Tank contents | ||
| Content in [l] | 19 | |
| Chimney connection | ||
| Diameter [mm] | ||
| Available | ||
| Sound values | ||
| Distance 1 m [dB(A)] | 76 | |
| Suitable fuels | ||
| EL fuel oil | ||
| Low-sulphur EL fuel oil | ||
| Kerosene | ||
| Diesel | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 830 | |
| Width (packaging excluded) [mm] | 430 | |
| Height (packaging excluded) [mm] | 560 | |
| Weight | ||
| (packaging excluded) [kg] | 18 | |
| Equipment, features and functions | ||
|---|---|---|
| Mobility | ||
| Carry/transport handle(s) | ||
| Plastic wheels | ||
| Rubber-tyred metal wheels | ||
| Non-marking full-rubber wheels | ||
| Forklift | ||
| Crane | ||
| Housing design | ||
| Steel | ||
standard equipment
optionally available
not available
Ratgeber Praxiswissen Profi-Beheizung (DE)
TRT-Ratgeber-Profi-Beheizung-HS-DE.pdf (3.98 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (CS)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-CS.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (DA)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-DA.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (DE)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-DE.pdf (5.34 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (EN)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-EN.pdf (5.34 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (ES)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-ES.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (ET)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-ET.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (FI)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-FI.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (FR)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-FR.pdf (5.34 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (HR)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-HR.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (IT)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-IT.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (LT)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-LT.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (LV)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-LV.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 70 D (NL)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-NL.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (NO)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-NO.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (PL)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-PL.pdf (5.38 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (PT)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-PT.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (RO)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-RO.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (RU)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-RU.pdf (5.38 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (SV)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-SV.pdf (5.37 MB)
Operating manual for oil heating units IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D (TR)
TRT-BA-IDE20D-30D-50D-60D-100D-TC-009-TR.pdf (5.38 MB)
Further information, guides, practial tips and capacity calculations
In our detailed product-catalogue websites you will find detailed information about the product, practical tips, guides for usage and, in some categories, capacity calculator for the perfect dimensioning.