Deep-well Pump TDP 750 E
Availability: Immediately available
Deep-well Pump TDP 750 E
Powerful 1,000 W stainless steel pump with a capacity of up to 5,100 litres of clear water per hour
Frequently bought together
Total
Free service water for house and garden
The TDP 750 E deep well pump with a housing made of corrosion-resistant stainless steel is the perfect helper when it comes to reliably pumping clear water from wells, reservoirs or shafts. This allows you to operate green spaces and garden areas as well as water-intensive consumption points in the house with free service water and save many cubic metres of expensive tap water year after year. The powerful 1,000 Watt pump delivers up to 5,100 litres of water per hour from a depth of up to 50 metres (max. delivery head).
Good to know: In general, deep well pumps or submersible pressure pumps are designed for pumping water from great depths. Depending on the delivery head and flow rate, the pumps are available in different designs and performance levels.
Plenty of water inside and outside
Suspended matter and dirt particles from a grain size of 1.8 mm (based on a solids content of 0.15% in one tonne of water) are filtered out. In this way, the pumped clear water can be used in addition to the existing domestic water supply, e.g. for the washing machine, toilet flushing or for washing up and cleaning purposes. And of course you can also use it to water the utility and ornamental garden, the lawn, the flower beds and the flower boxes on the balcony with free water throughout the summer.
Ecological and economical
Not only in view of global warming and the trend of increasingly hotter and drier summers, it is a good and profitable idea to integrate existing alternative water sources into the daily water requirements. Especially if you are in the lucky position to have a well, a well bore or a water shaft on your property. Because especially for the irrigation of the outdoor facilities or for rinsing, cleaning and washing purposes this existing natural resource can be used perfectly and you can save the expensive drinking water from the tap permanently. In this way, you also protect the environment, because tap water only obtains its high drinking water quality after elaborate chemical processes. And the less chemistry is used, the better.
The deep well pumps from Trotec are extremely efficient and have been specially developed as submersible pressure pumps. Thanks to their special design and high-quality technology, they can be used in very narrow drilled wells with a diameter of 12.5 centimetres or more. The standard equipment includes a 23-metre long power cable for the trouble-free pumping of water from greater depths. The integrated suspension eyes allow the pumps to be lowered effortlessly into wells, cisterns, drainage shafts or similar recesses. Like all submersible pressure pumps, deep well pumps are also suitable for mobile use at changing locations or for fixed installation.
Savings tip: Self-produced water saves money in the long term. The costs for a well in the garden (if it is not already there) are amortized within a few years, depending on the intensity of use. Specialised well builders will help you with the planning and construction of your garden well!
Plug & Play - the comfortable and practical solution
Power is supplied via the 23-metre underwater cable included in the scope of delivery and the TDP 750 E is immediately ready for use thanks to the Plug & Play mains connection. The housing is equipped with two sturdy suspension eyes for easy and safe lowering of the pump into the medium. The spacer foot, which can be attached as an option, allows the deep well pump to be inserted down to the bottom of the predrilled well, such as a drainage shaft or well. In this case, however, the bottom of the well must be clean and free of dirt.
High quality materials paired with modern technology
A stable stainless steel housing, a maintenance-free copper motor and a robust pressure connection with brass insert make the TDP 750 E extremely durable. The first-class workmanship and the state-of-the-art motor and pump technology guarantee smooth and energy-efficient operation of the pump during its permanent underwater use.
A stainless steel strainer protects the deep well pump from contamination and a thermal protection circuit from overheating. A reliable non-return valve prevents the backflow of already pumped water in the pipe and thus ensures that water is always available immediately when needed.
Full power in a slim design
The powerful pressure of the TDP 750 E of max. 5.2 bar reliably supplies the above-ground consumers with up to 85 litres of clear water per minute from a depth of up to 50 m. Because the compact power pack is built quite narrowly, the pump can even be used in smaller boreholes from a diameter of 125 mm.
Seasonal continuous use under water - but safe!
Once the pump, which is ready for use, has been lowered into the well or shaft at a maximum immersion depth of 20 metres, you do not need to worry about anything else. Because the TDP 750 E is watertightly encapsulated according to protection class IPX8 and designed for permanent use below the water surface. This high-quality feed pump always offers you the highest degree of safety. The operational safety of the deep well pump has been tested by the TÜV Rheinland testing institute. All you have to do is ensure that the pump is always completely immersed in the pumped medium and has a minimum distance of 50 cm to the bottom of the water to keep it away from possible deposits at ground level.
Advantages for the practice:
- Powerful 1,000 W output to pump up to 5,100 litres per hour
- Robust pressure connection with brass insert
- Stainless steel pump housing
- Maximum head: 50 meters
- Maximum pressure: 5.2 bar
- Extremely durable due to stainless steel housing and copper motor
- Maintenance-free motor with integrated thermal protection circuit in case of overheating
- Stainless steel dirt strainer
- IPX8 Protection class for the pump - suitable for continuous underwater operation
- With mains plug (Plug & Play)
- Reliable non-return valve for protection against backflow of the pumped medium
- 2 suspension eyes for draining the pump
- Trotec brand quality for deep well pumps
- Perfect for pumping clear water from deep wells, rainwater cisterns and shafts
- For effortless service water supply or for irrigation of house and garden
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 4.610.000.203 | |
| Electrical values | ||
| Mains connection | 220 - 240 V/50 Hz | |
| Max. power input [W] | 1,000 | |
| Pump capacity [W] | 750 | |
| Electric connection | ||
| Cable length [m] | 23 | |
| Performance data | ||
| Max. conveying capacity [l/h] | 5,100 | |
| Feed pressure [bar] | 5 | |
| Grit of pump [mm] | 1.8 | |
| Solids content in water [%] | 0.15 | |
| Max. delivery head [m] | 50 | |
| Number of phases | 1 | |
| Max. water temperature [°C] | 35 | |
| Max. submersion depth [m] | 20 | |
| Minimum operating depth [mm] | 767 | |
| Speed [rpm] | 2,850 | |
| Min. drill hole diameter [mm] | 150 | |
| Ambient conditions | ||
| Ambient temperature - min. [°C] | 0 | |
| Ambient temperature - max. [°C] | 35 | |
| Safety feature | ||
| Type of protection | IPX8 | |
| Protection class | I | |
| Control box | ||
| Connection plug | CEE 7/7 | |
| Housing design | ||
| Stainless steel | ||
| Functions and features | ||
| ON/OFF switch | ||
| Thermal overload protection | ||
| Thermal overload protection [° C] | 130 | |
| Dry run protection | ||
| Backflow preventer – opt | Backflow preventer | |
| Valve | ||
| Stainless steel screws | ||
| Use of a suspension cord | ||
| Suitable for both permanent operation (>10h) or salt-water operation | ||
| Continuous operation | ||
| Threaded connection | 1 1/4" | |
| Accessories scope of delivery | ||
| Adapter | ||
| Suitable for hose (hose DN) | ||
| Suitable for thread | ||
| Tear-resistant nylon cord, 12 m | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 125 | |
| Width (packaging excluded) [mm] | 125 | |
| Height (packaging excluded) [mm] | 790 | |
| Weight | ||
| (packaging excluded) [kg] | 11 | |
standard equipment
optionally available
not available
Operating manual deep well pump TDP 370 E / TDP 750 E (DA)
TRT-BA-TDP370E-TDP750E-TC-003-DA.pdf (1.71 MB)
Operating manual deep well pump TDP 370 E / TDP 750 E (DE)
TRT-BA-TDP370E-TDP750E-TC-003-DE.pdf (1.71 MB)
Operating manual deep well pump TDP 370 E / TDP 750 E (EN)
TRT-BA-TDP370E-TDP750E-TC-003-EN.pdf (1.71 MB)
Operating manual deep well pump TDP 370 E / TDP 750 E (ES)
TRT-BA-TDP370E-TDP750E-TC-003-ES.pdf (1.71 MB)
Operating manual deep well pump TDP 370 E / TDP 750 E (FR)
TRT-BA-TDP370E-TDP750E-TC-003-FR.pdf (1.74 MB)
Operating manual deep well pump TDP 370 E / TDP 750 E (HU)
TRT-BA-TDP370E-TDP750E-TC-003-HU.pdf (1.71 MB)
Operating manual deep well pump TDP 370 E / TDP 750 E (IT)
TRT-BA-TDP370E-TDP750E-TC-003-IT.pdf (1.71 MB)
Operating manual deep well pump TDP 370 E / TDP 750 E (NL)
TRT-BA-TDP370E-TDP750E-TC-003-NL.pdf (1.71 MB)
Operating manual deep well pump TDP 370 E / TDP 750 E (PL)
TRT-BA-TDP370E-TDP750E-TC-003-PL.pdf (1.71 MB)
Operating manual deep well pump TDP 370 E / TDP 750 E (PT)
TRT-BA-TDP370E-TDP750E-TC-003-PT.pdf (1.71 MB)
Operating manual deep well pump TDP 370 E / TDP 750 E (TR)
TRT-BA-TDP370E-TDP750E-TC-003-TR.pdf (1.72 MB)